Kubota DPF Emulator

Kubota DPF emulator
is a DPF Repair Kit device that completely remove the DPF system of your Kubota motor vehicle. You can
delete all DPF errors
of your vehicle with this emulator. You can even completely remove the DPF filter to relax the vehicle's exhaust system.
Kubota is a big manufacturer of engines. In this way, it has a variety of forklifts and work machines. There are 2 models in the forklift series that use adblue fluid and not adblue fluid.
It is very easy to troubleshoot the exhaust system in models of Kubota that only have DPF.
As Kubota DPF emulator,
DPF temperature 1
,
temperature 2
,
temperature 3
sensors and DPF differential pressure sensors are simulated.
Using the Kubota DPF emulator will be a fast and reliable solution.
Kubota exhaust temperature 1, exhaust temperature 2 and exhaust temperature 3 sensors are easy to distort because they are on the exhaust. Failure of one of these units will cause loss of torque in your vehicle.
Kubota DPF failure causes torque limitation of the vehicle and failure of the vehicle.
Kubota pressure sensor error can often be caused by errors caused by DPF congestion in your vehicle. With the Kubota DPF emulator, the vehicle's torque limitation is eliminated and time, cost and workload are reduced.
Use the DPF emulator for temperature sensor errors and completely prevent the malfunction by simulating the exhaust system.The Kubota DPF filter is located in the outlet section of the exhaust and between the Kubota DPF pressure sensors. Kubota DPF filter has very small pores. In this way, it has been used to reduce the dirty air passing through the exhaust to the emission standard.
Since the Kubota DPF filter has very small porosity, it can become clogged with soot after about 4 hours. As a result of the soot level of the Kubota DPF filter, the vehicle will malfunction and after some time it may become unable to work by limiting the torque. In case of loss of power, the DPF filter should be removed and cleaned by authorized people. This causes you high costs and time loss. It is sufficient to use Kubota DPF emulator for the rooted solution of errors such as DPF error, temperature sensor.
After the process, the DPF screen will appear blank and DPF will stay clean. No warnings or errors will appear on the DPF screen. With the Kubota DPF emulator, you will not receive an exhaust system warning. Kubota temperature sensors, pressure difference sensor and DPF filter errors will not come. Also, the sensors removed after installation may have been recovered.
The Components that simulated with Kubota DPF emulator (Kubota DPF Repair Kit):
3x Exhaust temperature sensor
1x DPF pressure sensor
Kubota DPF Repair Kit (Emulator) Supported Models:
All Kubota powered vehicles with DPF
Hyster Forklift
Yale Forklift
D1803
V2403
V2607
V3307
V3800
V6108 Motor Vehicles