{"product_id":"iveco-daily-md1cs069-adblue-scr-dpf-removal-emulator","title":"Iveco Daily MD1CS069 AdBlue SCR+DPF Removal Emulator","description":"\u003cp\u003eIveco Daily MD1CS069 AdBlue SCR+DPF Removal Emulator – A One-of-a-Kind Solution!\u003cbr\u003e\nIn Iveco Daily models equipped with the\u003cbr\u003e\nMD1CS069 ECU\u003cbr\u003e\n, faults caused by the\u003cbr\u003e\nSCR (AdBlue)\u003cbr\u003e\nand\u003cbr\u003e\nDPF (Diesel Particulate Filter)\u003cbr\u003e\nsystems can result in serious time and financial losses for both individual users and fleet managers. Common problems in these systems include AdBlue level and quality sensor failures, pump and injector issues, AdBlue freezing in cold weather, use of low-quality DEF fluid, DPF clogging, failed regenerations, and constant check engine lights.\u003cbr\u003e\nIn particular, DPF blockages restrict exhaust flow, which can lead to engine strain, increased fuel consumption, power loss, and even engine limp mode activation. This not only raises maintenance costs but also increases the risk of vehicle breakdowns.\u003cbr\u003e\nDeveloped as a complete solution to all these issues, the\u003cbr\u003e\nIveco Daily MD1CS069 SCR + DPF Removal Emulator\u003cbr\u003e\nelectronically disables both the AdBlue (SCR) and DPF systems. The ECU perceives these systems as functioning correctly. Therefore, even in the event of a physical failure, no warnings appear, performance remains unaffected, and the engine does not go into limitation mode.\u003cbr\u003e\nThis emulator not only eliminates warning lights but also significantly reduces fuel consumption. The engine continues to run at full efficiency without restrictions. Additionally, since the DPF regeneration process is disabled, risks associated with filter clogging are eliminated,\u003cbr\u003e\nthe engine breathes easier\u003cbr\u003e\n,\u003cbr\u003e\nexhaust flow improves\u003cbr\u003e\n, and\u003cbr\u003e\nengine life is extended.\u003cbr\u003e\nThis advanced device is manufactured exclusively by our company and is\u003cbr\u003e\nthe only one of its kind in the world\u003cbr\u003e\n. It has undergone extensive field testing and operates reliably under all conditions. It permanently eliminates all issues caused by SCR and DPF systems, ensuring your vehicle runs smoothly and efficiently.\u003cbr\u003e\nProduct Features and Advantages:\u003cbr\u003e\nEliminates all AdBlue-related issues such as warning lights, AdBlue faults, and torque limitation\u003cbr\u003e\nNo loss in engine performance – your vehicle continues driving without issues\u003cbr\u003e\nNo need to use AdBlue fluid – avoid refill and maintenance costs\u003cbr\u003e\nPasses vehicle inspections without problems (AdBlue system is perfectly simulated)\u003cbr\u003e\n5-year warranty – safe and risk-free investment\u003cbr\u003e\nWorks without interfering with the ECU – the original system remains intact\u003cbr\u003e\nSimulated Systems\u003cbr\u003e\n2. NOx Sensor\u003cbr\u003e\nOutput NOx Sensor\u003cbr\u003e\nPM (Particulate Matter) Sensor\u003cbr\u003e\nHCU (Urea Control Unit) Socket\u003cbr\u003e\n7-Pin AdBlue Pump Socket\u003cbr\u003e\nDPF Differential Pressure Sensor\u003cbr\u003e\nStart-Stop Information:\u003cbr\u003e\nAfter installing the emulator, the start-stop function must be disabled. Please check the instructions in the user manual for this.\u003cbr\u003e\nNote:\u003cbr\u003e\nBefore installing the emulator, the soot level should be\u003cbr\u003e\nbetween 10–20 g\u003cbr\u003e\n.\u003cbr\u003e\nTo achieve this value, if possible, perform a\u003cbr\u003e\nregeneration\u003cbr\u003e\nor\u003cbr\u003e\nreset the soot level\u003cbr\u003e\nbefore installation. This will ensure the most reliable installation.\u003cbr\u003e\nIf regeneration cannot be performed and the\u003cbr\u003e\nDPF level is high\u003cbr\u003e\nafter installing the emulator, the vehicle will automatically start regeneration.\u003cbr\u003e\nIn this case,\u003cbr\u003e\ndo not press the accelerator or brake pedal\u003cbr\u003e\nand\u003cbr\u003e\ndo not drive the vehicle\u003cbr\u003e\nuntil the regeneration process is complete. Please wait until the regeneration finishes.\u003cbr\u003e\nThis process may take\u003cbr\u003e\n20–40 minutes\u003cbr\u003e\n, depending on the\u003cbr\u003e\nsoot load\u003cbr\u003e\nand\u003cbr\u003e\ntemperature conditions\u003cbr\u003e\n.\u003cbr\u003e\nFor the vehicle to successfully complete the regeneration, the\u003cbr\u003e\nexhaust temperature sensors must be in good working condition\u003cbr\u003e\n.\u003cbr\u003e\nThe emulator is designed with\u003cbr\u003e\n5 wires\u003cbr\u003e\nand simulates the\u003cbr\u003e\nDPF, inlet NOx sensor, outlet NOx sensor, PM sensor, and HCU sensors\u003cbr\u003e\n.\u003cbr\u003e\nIf you do not connect this emulator, the cancellation of these sensors will not be completed.\u003cbr\u003e\nThe emulator is connected to the\u003cbr\u003e\n7-pin pump socket\u003cbr\u003e\nand is used for simulating the\u003cbr\u003e\nAdBlue pump signal and the dosing valves\u003cbr\u003e\n.\u003cbr\u003e\nIf you do not want to simulate the pump, you may leave this device disconnected.\u003cbr\u003e\nThe emulator has a\u003cbr\u003e\n3-wire\u003cbr\u003e\nstructure. This device is for simulating the\u003cbr\u003e\nAdBlue level – quality – temperature sensors\u003cbr\u003e\n.\u003cbr\u003e\nTo achieve a full system cancellation, all three devices must be connected.\u003cbr\u003e\nHowever, if you want the units mentioned above to continue operating, you may leave the related devices disconnected.\u003cbr\u003e\nAll three emulators can operate\u003cbr\u003e\nindependently\u003cbr\u003e\nfrom each other.\u003c\/p\u003e","brand":"Canbus Emulator","offers":[{"title":"Default Title \/ Adblue removal, Adblue repair, Nox Sensor repair","offer_id":52821401469266,"sku":null,"price":249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1051\/9239\/0994\/files\/Adblue-Nox-SCR-DPF_Emulator_41c4fc17-c22d-455f-aac3-797468ecb9e9.png?v=1773651966","url":"https:\/\/canbusemulator.co.uk\/products\/iveco-daily-md1cs069-adblue-scr-dpf-removal-emulator","provider":"CanbusEmulator","version":"1.0","type":"link"}